TEPRO-E heat transfer fluids
Tepro-E® — a modern ethylene glycol-based heat transfer fluid for heating, cooling and heat-exchange systems. It ensures reliable equipment operation, helps protect the system against corrosion and is suitable for a wide range of technical solutions. An excellent choice if you need a heat transfer fluid that offers an optimal combination of quality and efficiency.
You can buy TEPRO-E heat transfer fluid by phone or online using the “Order” or “Need a consultation?” buttons. This is a convenient way to quickly place an order or receive advice on choosing the right product option.
- climate-control systems
- industrial refrigeration
- heat pumps
- ice arenas
- other heat-exchange equipment
- secondary refrigerants
- non-freezing fluids
- antifreezes
- ethylene glycol
- demineralised water
- corrosion inhibitors
- defoamers
- colourants
- other functional additives
Technical data
Technical data for TEPRO-E working fluids
| Parameter | Value |
|---|---|
| Density at +20 °C | TEPRO-5E1.032–1.036 g/cm3 TEPRO-10E1.040–1.043 g/cm3 TEPRO-15E1.048–1.052 g/cm3 TEPRO-20E1.058–1.062 g/cm3 TEPRO-25E1.063–1.066 g/cm3 TEPRO-30E1.068–1.072 g/cm3 TEPRO-35E1.073–1.077 g/cm3 TEPRO-40E1.078–1.081 g/cm3 TEPRO-65E1.094–1.099 g/cm3 |
| Freezing point | TEPRO-5E≤ −5 °C TEPRO-10E≤ −10 °C TEPRO-15E≤ −15 °C TEPRO-20E≤ −20 °C TEPRO-25E≤ −25 °C TEPRO-30E≤ −30 °C TEPRO-35E≤ −35 °C TEPRO-40E≤ −40 °C TEPRO-65E*≤ −17 °C |
| pH | 8.5–9.5 |
| Alkalinity | ≥ 10 cm3 |
| Initial boiling point | ≥ 100 °C |
| Corrosive action on metals | |
| Copper, brass, steel, cast iron, aluminium | ≤ 0.1 g/m2 per day |
| Solder | ≤ 0.2 g/m2 per day |
| Foaming | |
| Foam volume after 5 min | ≤ 5 cm3 |
| Foam stability | ≤ 1 s |
| Rubber swelling | ≤ 5 % |
* When diluted with water at a 1:1 volume ratio.
Technical data for TEPRO-KE concentrate
| Parameter | Value |
|---|---|
| Density at +20 °C | 1.121–1.124 g/cm3 |
| Freezing pointWhen diluted with water at a 1:1 volume ratio | ≤ −30 °C |
| pHWhen diluted with water at a 1:1 volume ratio | 8.5–9.5 |
| Alkalinity | ≥ 10 cm3 |
| Initial boiling point | ≥ 136 °C |
| Corrosive action on metals | |
| Copper, brass, steel, cast iron, aluminium | ≤ 0.1 g/m2 per day |
| Solder | ≤ 0.2 g/m2 per day |
| Foaming | |
| Foam volume after 5 min | ≤ 5 cm3 |
| Foam stability | ≤ 1 s |
| Rubber swelling | ≤ 5 % |
The price of the coolant
Get a personalized price consultation by calling us right now. We are ready to provide optimal cost conditions for your project.
How the price is formed
The price of the coolant and the price of ethylene glycol solutions takes into account the high quality of the products, remaining optimal and affordable for our customers.
It is clear that the cost of our Tepro-E coolants is higher than the price of ethylene glycol solutions, which is due to their complex formulation and improved characteristics.
The price of coolants based on ethylene glycol is lower than the price of coolants based on propylene glycol.
And finally, the more you buy, the bigger the discount you get, and the lower the price of the coolant for you.
Contact the phone number to find out about available offers and favorable conditions for purchasing our coolants.
Our experts are ready to help you!
Delivery of coolant
There is a certain specificity of transportation and storage of liquids. We have extensive experience and developed methods for solving such tasks.
The following ways to get our products are available:
Self-collection from the warehouse
You can get the selected coolant at our warehouse.
Delivery across Ukraine
We deliver products throughout Ukraine (Kyiv, Lviv, Kharkiv, Odesa, Dnipro, Vinnytsia, Zaporizhzhia, Ivano-Frankivsk, Lutsk, Poltava, Rivne, Zhytomyr, Chernihiv, Khmelnytskyi, Ternopil, Cherkasy, Kam’yansk, Chernivtsi, Uzhgorod, Mykolaiv, Kherson, Sumy…).